|
 |
 |
HOME ProductsHeating by the far infrared film
(electric heating film) |
 |
|
|
 |
|
|
 |
 |
|
| Model name |
Power consumption |
width |
Calorific value |
Packaging unit |
| DW300 |
60W h/m |
30cm |
52kcal |
100~150m/roll |
| DW500 |
100W h/m |
50cm |
86kcal |
100~150m/roll |
| DW600 |
120W h/m |
60cm |
103kcal |
100~150m/roll |
| DW1000 |
200W h/m |
100cm |
172kcal |
80~100m/roll |
|
|
 |
Product name |
Heating film |
General boiler |
Remarks |
Building method |
Dry and wet type all available |
Only wet type |
Can be freely chosen |
When building |
Boiler room |
Not required |
Area is required |
|
Heating pipes |
None |
Externally exposed |
Clean |
Constructed thickness |
10mm |
110~120mm |
10cm higher floor height |
Construction period |
1 day |
4~5 days(Including curing) |
Enhancement of cash flow |
Load per pyeong |
2kg |
About 240kg |
2.38 tons/10 pyeong lower load |
When operating |
Maintenance |
Not required |
Continuously required |
Convenient |
A/S |
Nearly none |
Often |
Construction without worry |
Breaking due to cold weather |
None |
May occur |
Leaving the place without worry |
Floor repairs |
Mid-scale repair |
Large-scale repair (Tearing apart) |
Convenient |
Maintenance costs |
Low (64%) |
High (100%) |
Fuel cost reduction by 60% |
Remodeling |
Easy |
Many restrictions |
|
|
 |
Product name |
Heating film |
Underfloor heating panel |
Heating material |
Carbon |
Nickel Fe-Chromium wire |
Electromagnetic waves |
Nearly none |
Plenty |
Far infrared |
90.4% |
None |
Connection structure |
Parallel |
Series |
Overheating |
Maintain at a certain temperature |
Keep increasing until overheating |
Durability |
No corrosion occurs, and heating can be sustained in case of partial short-circuiting |
Corrosion occurs, and function will be lost in case of short-circuiting |
Indoor temperature variation between top and bottom |
Heating by radiation keeps the indoor space warm entirely |
Floor is hot and the ceiling is cold (Severe variation in temperature) |
|
 |
Classification |
Supply unit price |
Monthly usage |
Monthly heating costs |
Caloric value (㎉/㎡) |
Heating index |
Kerosene boiler |
900KRW/ℓ |
175ℓ |
157,500KRW |
150㎉/㎡ |
100 |
LPG |
1050KRW/㎏ |
130㎏ |
136,500KRW |
150㎉/㎡ |
82 |
Electric underfloor panel |
66.8KRW/kwh |
1,248kwh |
83,366KRW |
110㎉/㎡ |
52 |
Film heater |
66.8KRW/kwh |
840kwh |
56,112KRW |
125㎉/㎡ |
36 |
|
|
 The monthly use volume is based on 10 pyeong and 30 days with 8 hours per day |
| In case of the film heater and the electric underfloor panel, their fees include the basic fees |
| In case of LPG, kerosene, and boiler, the monthly usage can vary slightly depending on the thermal efficiency associated with insulation of building and types of devices that are used. |
|
|
|
|
|
|
 |
